Aspire Speeder 200w with 3.6ml Revvo Tank Kit

$80.00

×

A magnificent pairing of the high powered Aspire Speeder Mod with the innovative Revvo Tank

SKU: N/A Categories: , , , Tag:

Description

**A direct to lung vaporiser.

Introducing a high powered kit option, the Speeder Revvo kit. The Speeder is a compact but heavy duty 200W mod. Dual 18650 high rate batteries power this device that is packed with all the extras that Aspire users come to expect. Multiple TC/VV/VW/TCR and CPS (Customizable Power Setting option) for the vaping sweet spot.

Along with its masses of power, there are also a ton of features that really allow for fine tuning. Wattage range 1-200W, Voltage range 0.1-8.4V, TC range 200-600℉ (100-315℃) Further options, TCR, Bypass and CPS can really nail the flavour/vapour from your tanks.

The Aspire Revvo sub-ohm tank is an innovative, revolutionary leak-proof tank with a whole new concept in terms of coil design and filling.  A different setup to all my other tanks, I usually play around with all new tanks to see if I can figure out all their workings but even I had to watch a video on how to change the coil!

TIP: If treated right, these coils are said to have a longer life than conventional coils.

The Revvo tank uses a revolutionary new coil design called ARC – Aspire Radial Coil. Doesn’t even look like a coil, looks more like the old kitchen stove tops my mother used to use. Horizontal and disc shaped in nature, effectively increasing the surface area for that awesome flavour/vapour production that they are known for.

These coils comprise of spiral Kanthal wire with organic cotton on the underside. The resistance is 0.1 – 0.16 ohm (recommended wattage below).

0.1 – 0.16 Ω 50-100W (Best 80-85W)

A 24mm diameter tank that can hold 3.6ml of liquid. The tank has a fully adjustable top airflow by way of 3 airflow slots a Pyrex glass tank allows you to see at a glance the amount of e-liquid in the tank, and extremely easy top fill through a spring loaded filling tube. This powerhouse of a mod with the Revvo tank gives a vast array of adjustable options.

This Speeder Revvo kit comes in a Red PU leather finish, the soft suppleness of leather gives a more luxurious feel in the hand.

Innovative new filling technique – Filling your new Revvo through the centre of the tank, in which sits a spring loaded filling tube. The spring of the tube is soft enough to allow even slight pressure from almost any type of bottle/glass dropper to open it, but strong enough to create a leak proof seal when released after filling.

To use: Priming your new coil is the first task for any new coil/tank and this is no exception. Priming helps to protect your coil and yourself from dry hits or a burnt horrible taste.

To access the coil, forget all that you know about conventional coils, the ARC is in another league. Instead of the usual coil access from the base of a tank you will need to reverse it and go through the top.

  • Unscrew mouthpiece/top cap portion of your tank
  • Unscrew the conical fill cone (don’t lose it)
  • Carefully pry up the horizontal disc coil (may need to use your fingernail)

At first, I will admit I was stumped as to how to effectively prime these coils for that promised long life. I guess you could just fill the tank and wait around for a little longer than usual for full saturation or you could try something a little trickier. With these coils I would prime before insertion. Hold the coil upside down in your hand, exposing the white cotton side. Very carefully (it may get messy) drip a few drops onto the cotton. You should be able to see the cotton wicking up the liquid.

  • Drop fresh coil over the filling tube ensuring it is flush with all sides of the tank
  • Rescrew the conical fill cone
  • Rescrew the mouthpiece/top cap
  • If empty fill your tank (very unique – spring loaded filling tube accessed via drip tip)
  • Wait patiently (5-10 minutes) just to ensure complete saturation
  • Vape time (ensure your wattage is within recommended range)!

TIP: You can still change your coil without having to empty out the e liquid from the tank.

Now comes the waiting, 5-10 minutes should suffice to ensure complete saturation of your coil (some reviewers have even recommended turning the tank upside at this point for a short while). Now time for the primer puffs – without touching the firing button take a few sharp short pulls from the tank.

Package Contains:

x1 Speeder mod / x 1 Revvo tank /x 2 Coils (0.10-0.16ohms) / x1 Glass tube / x10 O-rings / x1 USB cable /x 2 Warning cards /x 1 User manual / x1 Warranty card / x1 Protective silicone cap

Additional information

color

Red Leather

Reviews

There are no reviews yet.

Be the first to review “Aspire Speeder 200w with 3.6ml Revvo Tank Kit”

Your email address will not be published. Required fields are marked *

53 − 47 =