I would like to extend a hearty welcome to Healthy Rips, I am excited that you are here! Known for creating high end herbal vaporisers at a fair price, these fine folks also share my desire to offer the healthiest experience that is possible. Their premise is simple, “to design and develop affordable devices that outperform the more expensive ones“. As the designers, the manufacturers as well as being the distributors they are able to offer a lower price point than comparable high-end herbal vaporisers.
The Fury Edge V2 is the larger of the 2 current Fury’s (Edge V2 and Fury 2) on offer, standing 10mm taller but I still consider it to be small enough to be palmed. The battery capacity is also higher (2300mAh). The actual look of the vape is one that I have seen before (nice and compact) and I particularly like the feel of the Edge, kind of rubbery suede-like. The body is actually made from Kirksite Alloy Unibody, a lightweight and durable Zinc based Alloy.
Healthy Rips crafts vaporisers that pump out the vapour whilst allowing you to modify the duration of your session (between 3-7 minutes). The OLED Flip Screen allows for precise temperature control with Haptic Feedback provided, you can expect some pretty quick heat up times too (20 seconds). Lastly (but pretty important), is the fact that you can use this vape with 3 varieties of herbal substance; dry herb, thick oil or concentrate.
Measurements: 51.8 x 27.4 x 90.5mm
TRIPLE USAGE HERBAL VAPING
As mentioned, you can vape herb in a myriad of ways with the Fury Edge V2. I have many customers that require a different vape for each various herbal substance that they enjoy consuming. This can obviously get very pricey and then there is the fact that you will then need to maintain all your various devices. The Stainless-Steel Chamber can hold a decent amount of herb (.175g – .205g) and x1 stainless steel pad is provided for usage with thick oils/concentrates. My one word of advice is that you may want to be careful with concentrates as some require very high temperature to effectively vaporise.
TIP: A medium to fine grind of your herbal material is recommended with the Fury Edge.
HYBRID CONVECTION HEATING
The Edge heats primarily via convection with a little conduction thrown in. Convection is the process of hot air passing over the herbal material and is my preferred method of heating. Conduction is radiant heat (chamber walls heating) and the blend of both systems should result in even vaporisation and a flavoursome experience. You can select your own individually preferred temperature via the side up/down buttons. The Edge V2 heats up quite fast and should be ready for inhalation within 20ish seconds.
Temperature Range: 138°C – 221°C
TIP: Don’t forget the wide range of herbs that can be used with a vaporiser. Lavender and Camomile are 2 such examples that require low temperatures for effective vaping. Please also keep in mind that not all herbal vapes can reach very low temperatures.
A pathway comprised of Stainless Steel (food grade) and glass that is totally isolated from any electronic components. What does this mean? Some inferior models have the vapour pass through various internal components (mostly electrical) before reaching your mouth. This affects the purity of your vapour and is considered a lesser experience. With the Fury Edge V2, your vapour passes through a stainless-steel chamber then straight up (via a stainless-steel mesh screen) into the glass lined mouthpiece.
TIP: If absolute purity is your thing, I recommend using the accessories attachment with a glass stem mouthpiece instead of the plastic (glass lined) original mouthpiece.
BATTERY CAPACITY AND CHARGING
2300mAh capacity is pretty good for a herbal vape and should give up to 90 minutes of continuous use before a charge is needed. A USB-C Charger is provided in this kit and a full charge will take approximately 2 hours. A nice feature of the Fury Edge V2 is the fact that you can check the status of the battery without having to turn it on. One simple press of the power button and the screen will light up with a battery symbol.
Due to the design the screen sits handily at the top of the device and not on the side as the majority have. Once on, the screen will display the following;
- Battery Status
- Heat up Status (as heating progresses)
- Pre-set Temperature (disappears once temperature has been reached)
- Session time (shows up when set temperature has been reached)
The screen can also be flipped for better vision depending on how you hold the device. Holding down the power button for 3 seconds will flip the orientation.
MOUTHPIECE AND ATTACHMENT
The mouthpiece component of the Fury is a little more intricate than most, definitely larger/longer with glass side panels that enable you to watch the vapour passing up through it. The mouthpiece clicks in and out of place right above the heating chamber and extends the vapour pathway. A silicone O-ring and screen separates the mouthpiece from the chamber when in place, effectively increasing draw resistance whilst stopping you from inhaling any stray herb. At the very top the mouthpiece narrows for a nice fit with your lips.
For those of you that like options, Healthy Rips has supplied an accessories attachment within this kit enabling you to attach various attachments (glass mouthpieces etc). An extra long glass stem mouthpiece has been provided for use with the attachment. You can also purchase further attachment options such as a bent glass straw.
TIP: A Fury Edge Silicone Cover has been provided in this kit. This cover will not only help protect your vape but will also act to keep odours trapped within.
- X1 Fury Edge V2
- X1 Protective (Smell) cover
- X1 Mouthpiece (glass vapour path within)
- X1 Accessories attachment
- X1 Extended glass mouthpiece accessory
- X1 Stainless steel wax/oil pad
- X1 Extra O-ring and screen set
- X1 Wax and cleaning tool
- X1 USB-C Cord
- X1 Cleaning Brush
- X1 Tweezers
- X1 User manual
- Convection Heating Technology
- Protective ‘Smell’ Cover
- Accessories Attachment (holds glass attachments)
- OLED Digital Flip Screen
- Temperature Range 138°C – 221°C
- Precision Temperature Control
- 3 Clicks On/Off
- Vibration Notifications
- Glass Vapour Path
- Kirksite Unibody
- Size: 51.8 x 27.4 x 90.5mm (2” x 1” x 3.5”)
- Weight: 5.6 Ounces
- Chamber Capacity .175g to .205g
- Low Draw Resistance
- 20 Second Heat-up Time (almost on-demand vapor)
- Isolated Air Path – Food Grade Stainless Steel
- Food Grade Stainless Steel Chamber
- Charges in 75 – 90 Minutes
- Class A 2300 mAh Lithium Polymer Battery
- Provides approximately 75-90 minutes of battery use per charge
- 5 Minute Auto Shut-off Protection
- RoHS Certified for 100% Health and Safety
- Adjustable Session Timer Between 3-7 Minutes
- Battery Check While Powered Off
- Mesh Stainless Steel Screen
- USB-C Charging – Bi-directional and Faster Charging
- One-year manufacturer replacement warranty (*Excludes loss, tampering, physical damage, or liquid damage)
- Lifetime half price replacement warranty (*Excludes loss, tampering, physical damage, or liquid damage)