3 Pack of GT4 Clapton Cores 0.15ohm
GT Cores by Vaporesso are specially designed to fit the NRG and NRG SE Tank (used in the Swag and Revenger models – see below for full compatibility list). These are essentially coils with a fancy name. They come in 3 varieties – cotton, CCELL Ceramic or mesh with a range of sub-ohm resistances. GT Cores are said to be able to produce larger clouds that standard coils.
|GT Core 4 – 0.15ohm||30-70w (best at 45-60w)|
TIP: GT Cores are interchangeable with the Smok Baby/Big Baby range of coils.
To use: Priming your new coil is the first task for any new coil/vaporiser and this is no exception. Priming helps to protect your coil and yourself from dry hits or a burnt horrible taste. Unscrew the tank for the mod (510 threaded) and unscrew the base of the tank from the glass to expose the used coil within (use a paper towel if difficult to unscrew). Remove the coil and screw in the new one. You now need to saturate the cotton within the coil with a little e juice (few drops). Reassemble your tank and screw back onto your mod (at this point it is good practice to check all sealing O rings to ensure no leakage!). Slide open the drip tip and dribble in a little more e-juice just to ensure complete saturation. Place your device to the side for a short while to allow all the e -juice to make its way through. Now time for the primer puffs – without touching the firing button take a few sharp short pulls from the tank. You may see air bubbles rising to the top of the tank. Your new coil is now ready for use.
Contains: x3 GT 4 Cores
The Vaporesso GT Core replacement coils are compatible the Cascade Baby SE Tank, Cascade One Plus and Cascade One Plus SE Kit, Cascade tank with GT Core Adapter, Cascade Baby tank, Cascade Mini tank, NRG tank, NRG Mini tank, Tarot Baby Kit, Polar Kit, Armour Pro Kit, Switcher Kit, Swag Kit, Revenger Go Kit, Revenger Mini Kit, Revenger X Kit, Revenger Kit, Squid Industries Peacemaker tank, SMOK V8 Baby Beast & Big Baby Beast.